Rev-A-Shelf RAS-FD-KIT Instrucciones De Instalación página 2

STEP 1
Disengage wire file frame
from slides by depressing the
trigger and pulling slide away
from file frame (See Fig. 1).
Repeat with all four slides.
STEP 2
Attach upper slides to the
FRONT U-shaped support
brackets with only 1 machine
screw in the circular hole
(Fig. 2A).
Loosely attach upper slides to
the REAR U-shaped support
brackets with (4) machine
screws (Fig. 2B).
NOTE: The adjustable rear
mounting bracket should be
placed between the upper
slide and the U-shaped
support bracket.
HINT: Start with the left
screw (circular hole) before
proceeding with the right
screw (slotted hole).
STEP 3
Securely attach lower
slides to REAR U-shaped
support brackets with (4)
machine screws (See Fig. 3).
DO NOT attach lower slides
to FRONT U-shaped bracket
at this time!
2
FIG.
1
FIG. 2A
Upper height location
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 2B