ASROCK Z77 Extreme11 Manual De Instrucciones página 18

2.1 Installing the CPU
In order to provide the LGA 1155 CPU
sockets more protection and make the
installation process easier, ASRock
has added a new protection cover on
top of the load plate to replace the
former PnP caps that were under the
load plate. For the installation of Intel
1155-Pin CPUs with the new protection
cover, please follow the steps below.
Before you insert the 1155-Pin CPU into the socket, please
check if the CPU surface is unclean or if there are any bent
pins in the socket. Do not force to insert the CPU into the
socket if above situation is found. Otherwise, the CPU will be
seriously damaged.
Step 1. Open the socket:
Step 1-1. Disengage the lever by pressing
Step 1-2. Keep the lever positioned at
Step 2. Insert the 1155-Pin CPU:
Step 2-1. Hold the CPU by the edge which
Step 2-2. Orient the CPU with the Integrat-
18
it down and sliding it out of the
hook. You do not have to remove
the protection cover.
about 135 degrees in order to flip
up the load plate.
is marked with a black line.
ed Heat Sink up. Locate Pin1 and
the two orientation key notches.
ASRock Z77 Extreme11 Motherboard
®
1155-Pin Socket Overview
black line