ASROCK Z77 Extreme11 Manual De Instrucciones página 52

2.16.2 Installing Three CrossFireX
Step 1. Insert one graphics card into PCIE1 slot, another graphics card to
PCIE3 slot, and the other graphics card to PCIE5 slot. Make sure
that the cards are properly seated on the slots.
Step 2. Use one CrossFire
PCIE1 and PCIE3 slots, and use the other CrossFire
to connect the graphics cards on PCIE3 and PCIE5 slots. (The
CrossFire
chase, not bundled with this motherboard. Please refer to your
graphics card vendor for details.)
Connect a VGA cable or a DVI cable to the monitor connector or
Step 3.
the DVI connector of the graphics card that is inserted to PCIE1
slot.
52
TM
Bridge to connect the graphics cards on
TM
Bridge is provided with the graphics card you pur-
TM
CrossFire Bridge
ASRock Z77 Extreme11 Motherboard
TM
-Ready Graphics Cards
TM
Bridge