Tabla de contenido
Publicidad
Installing an Expansion Card
Step 1.
Before installing an expansion card, please make sure that the
power supply is switched off or the power cord is unplugged.
Please read the documentation of the expansion card and make
necessary hardware settings for the card before you start the
installation.
Step 2.
Remove the bracket facing the slot that you intend to use. Keep
the screws for later use.
Step 3.
Align the card connector with the slot and press firmly until the
card is completely seated on the slot.
Step 4.
Fasten the card to the chassis with screws.
ASRock Z77 Extreme11 Motherboard
23
Publicidad
Tabla de contenido
