Placing And Mounting The Docking Station; Placing On A Desk Or Table; Mounting To A Wall - Motion CFT Serie Guia Del Usuario

Placing and mounting the Docking Station

You can place the Docking Station on a desk or table, or mount it
to a wall, cart, arm mount, or other equipment.
The bottom of the Docking Station has a standard VESA
mounting pattern that can be used with other VESA-compatible
equipment.
The Docking Station also includes a security slot for locking the
Docking Station to a table, desk, or other fixture.
Note: Certain mounting configurations may require other
components such as a wall bracket.

Placing on a desk or table

When using the Docking Station on a desk or table, place the
Docking Station approximately 4 inches from a wall to allow you
to reach the spare battery.
Depending on your intended use, you can adjust the viewing
angle of the Docking Station to three different positions: 15°, 25°,
or 38°. For more information about viewing angles, see "Setting
the viewing angle" on page 8.

Mounting to a wall

Mounting the Docking Station to a wall requires a separate wall
bracket that is compatible with a 75 mm VESA-pattern mount.
To minimize the distance the Docking Station projects from the
wall, we recommend that you adjust the viewing angle to 38°.
The wall bracket must facilitate this angle to keep the tablet in a
vertical orientation.
2 Docking Station