Philips SonicPro 30 Manual Del Usuario página 15

Brush head replacement reminder
Pressure sensor
- Triple tone of high-med-low means the EasyStart
feature has been deactivated. The battery level
indicator light will blink amber 1 time to confirm
deactivation.
Note: To achieve clinical efficacy, EasyStart needs to
be deactivated.
Note: You can only activate or deactivate the brush
head replacement reminder when a smart brush head
is on the handle.
Put the handle on the plugged-in charger.
1
2 Press and hold the power on/off button while the
handle remains on the charger.
3 Keep the power on/off button pressed until you
hear a series of two short beeps (after 5 seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the brush
head replacement reminder feature has been
activated. The battery level indicator light will also
blink green 2 times to confirm activation.
- Triple tone of high-med-low means the brush
head replacement reminder feature has been
deactivated. The battery level indicator light will
blink amber 1 time to confirm deactivation.
Put the handle on the plugged-in charger.
1
2 Press and hold the power on/off button while the
handle remains on the charger.
3 Keep the power on/off button pressed until you
hear a series of three short beeps (after 7 seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the pressure
sensor feature has been activated. The battery
level indicator light will also blink green 2 times to
confirm activation.
15
English