Tripp-Lite UPBW-05K0-1A1C El Manual Del Propietario página 3

USB Device Charging
Notes:
• A button is located on the device next to the USB Type-C input port.
When the button is pressed once, the device will turn on and the LED
indicators will illuminate to show how much battery capacity is left.
• When charging a USB device, the LED indicators on the device
will illuminate in one of four combinations to indicate the following
battery capacity levels:
• 75-100% Capacity – 4 LEDs illuminate solid
• 50-75% Capacity – 3 LEDs illuminate solid
• 25-50% Capacity – 2 LEDs illuminate solid
• 5-25% Capacity – 1 LED illuminates solid
• 0-5% Capacity – 0 LEDs illuminate
• When the Mobile Power Bank is plugged into an outlet, it starts
charging devices attached to the two USB ports first and will
charge the internal battery with the remaining power.
1. Connect up to two mobile devices to the USB-A or USB Type-C
ports on the power bank using a cable suitable for your device.
Note: See Optional Accessories for compatible Tripp Lite USB
device cables
2. The device will begin charging with the LED indicator light(s)
illuminating according to the combinations listed above.
3. When charging the Mobile Power Bank in a wall outlet, the device's
four LED lights will blink as it reaches each level of charging capacity.
11-283 93-3BA4-BOOK.indb 3 11-283 93-3BA4-BOOK.indb 3
3
12/30/2019 10:19:31 A 12/30/2019 10:19:31 A