Cisco SPA8000 Instalación Rápida página 11

Action
Enable/Disable
WAN Access to
the Web-based
Utility
Manual Reboot
Factory Reset
User Factory
Reset
†Follow these instructions to enter the password .
A, B, C, a, b, or c — press 2 .
G, H, I, g, h, or i — press 4 .
M, N, O, m, n, or o — press 6 .
T, U, V, t, u, or v — press 8 .
All Other Characters — press 0 .
For example, to enter the password phone@21 by keypad, press these keys: 466021 .
Then press the # (pound) key to indicate that you have finished entering the password .
To cancel your entry and return to the main menu, press * (star) .
Interactive Voice Response Menu
Command
92 Enable - Press 1 .
Disable - Press 0 .
2668
(R-E-B-O-O-T)
8 Confirm - Press 1 .
(R-E-S-E-T)
Cancel - Press *
(star) .
88 Confirm - Press 1 .
Cancel - Press *
(star) .
Choices
Use this setting to enable or
disable WAN access to the Web-
based Utility . (This Utility lets
you configure the Gateway .)
After you hear, "Option
successful, " hang up the phone .
The Gateway will automatically
reboot .
This feature may be protected
by a password available only
from your ITSP . If necessary,
enter the password .† The
Phone Adapter will request
confirmation; enter 1 to
confirm . You will hear, "Option
successful . " Hang up the phone .
The Phone Adapter will reboot,
and all settings will be reset to
their defaults .
The Gateway will request
confirmation; enter 1 to
confirm . You will hear, "Option
successful . " Hang up the phone .
The Gateway will reboot and all
user-configurable settings will
be reset to their factory default
settings .
D, E, F, d, e, or f — press  .
J, K, L, j, k, or l — press 5 .
P, Q, R, S, o, q, r, or s — press  .
W, X, Y, Z, w, x, y, or z — press 9 .
Description
11