Cisco SPA8000 Instalación Rápida página 9

Action
Enter Interactive
Voice Response
Menu
Check Internet
Connection Type
Set Internet
Connection Type
Check IP Address
(Ethernet Port)
Set Static IP
Address
Check Network
Mask
(or Subnet
Mask)
Set Network (or
Subnet) Mask
Check Gateway
IP Address
Interactive Voice Response Menu
Command
****
100
101 DHCP - 0
Static IP - 1
PPPoE - 2
PPPoe, DHCP - 3
DHCP, PPPoE - 4
110
111
120
121
10
Choices
Use this command to enter
the Interactive Voice Response
Menu . Do not press any other
keys until you hear, "Linksys
configuration menu . Please
enter the option followed by
the # (pound) key or hang up
to exit . "
Check static or dynamic IP
address assignment.
Select the type of Internet
connection you are using . Refer
to the documentation supplied
by your Internet Service
Provider (ISP)
Hear the IP address assigned
to the Gateway's Internet
(external) interface .
First, set the Internet
Connection Type to static IP
address; otherwise, you will
hear, "Invalid Option, " if you try
to set the static IP address . Use
the * (star) key when entering a
decimal point .
Hear the network or subnet
mask assigned to the Gateway .
First, set the Internet
Connection Type to static IP
address; otherwise, you will
hear, "Invalid Option, " if you try
to set the network or subnet
mask . Use the * (star) key when
entering a decimal point .
Hear the IP address of the
Gateway (usually the network
router) .
Description
9