LaCie big disk extreme+ Guía De Instalación Rápida página 5

Setup Steps
1. Connect the power supply.
2. Turn on the drive by moving the power switch to ON or AUTO (drive powers
on/hibernates automatically).
3. Connect the interface cable of your choice (eSATA or USB 2.0) to the drive and
to your computer. Do not connect both interface cables at the same time. The
drive will mount in My Computer (Windows) or on your desktop (Mac).
4. Before using your drive, LaCie Setup Assistant software must be launched to
format your drive. It will:
• Optimize your drive according to your needs
• Copy the manual and utilities onto your drive
To launch LaCie Setup Assistant:
Windows users: Double-click the LaCie drive icon in "My Computer".
Mac users: Double-click the "LaCie Setup Assistant" icon on your desktop.
NOTE: If you do not launch LaCie Setup Assistant or if you quit LaCie Setup Assistant after the formatting has
begun, your drive will not be ready to use and will require manual formatting. The user manual and utilities will
not be available on your drive and will have to be downloaded from the LaCie website: www.lacie.com
NOTE: Using LaCie Setup Assistant does not prevent you from using your computer's native disk utility program
to format or partition your LaCie drive. Simply follow the Setup Assistant through completion, then use your
computer's native disk utility (Disk Management for Windows or Disk Utility for Mac) to reformat your drive.
See the user manual for more information.