Tripp-Lite P116-000-HDMI El Manual Del Propietario página 4

Installation
Note: Make sure all devices you are connecting are powered off prior to
installation.
1. Connect the video source to the adapter's VGA input port.
Note: A Component Video (RGB) to VGA Adapter cable is required for
connecting a TV / DVD player.
2. Connect the audio source to the adapter's RCA input ports.
3. Connect the HDMI display to the adapter's HDMI output port.
4. Connect the power supply to the unit, then plug it into
an appropriate power source, such as a Tripp Lite Surge
Protector, Power Distribution Unit (PDU), or Uninterruptible
Power Supply (UPS).
5. Power on the connected computer or TV / DVD player and
monitor. The LED next to the VGA input port will illuminate
to indicate it is connected to a powered-on source. The LED
next to the HDMI output port will illuminate to indicate it is
connected to a powered on monitor.
17-11-385-933752.indb 4
4
1/23/2018 5:03:41 PM