Bosch MIC7000 Guía De Instalación Rápida página 9

MIC7000 Illuminator
3. Remove the appropriate access plug from the camera
head, using a ¼ in. drive wrench (not supplied) with the
spanner tool (supplied). For upright cameras, remove
the plug near the visor. For inverted cameras, remove
the plug farther away from the visor.
Notice!
Risk of damage to camera!
Do not allow water or dirt to enter the open connector
port.
Bosch Security Systems
Install the MIC7000 Illuminator | en
1/4"
1/4"
2014.08 | 1.2 | F.01U.306.503
9