Sime SOLIDA 5 PL Manual De Instrucciones página 20

H) Push the cochlea feeder motor in its housing container pellets.
Fig. 11 - Insertion cochlea
I) Mounting the burner (B-Home Round 25 for SOLIDA 5 PL and B-Essential Round 50 for SOLIDA 8 PL+).
Position the seal (4), supplied with the burner, between the flange (5) and the door (2) of the boiler
Push in the 4 screws (6) (M8) but ONLY tighten the two screws which hold the lower split-flange. The two screws of the upper split-
flange must ONLY BE PLACED but not tightened.
Insert the combustion chamber of the burner into the boiler as far as is necessary (see close-up A)
Tighten the two semi-flanges with the screws (7) and the screws (6), which were previously just placed in position.
WARNING DANGER
The burner MUST be mounted ONLY in the position shown in the diagram. Any other position is FORBIDDEN.
The flame will propagate in a straight line, through the hole of the burner combustion chamber.
CLOSE-UP A
418
20
7
1
2
3
4
5
6
Round 25
135
Round 50
159