Optimal Slicing Performance - Globe ARBY'S 4913 Manual De Instrucciones Para El Propietario Y El Operador

OPTIMAL SLICING PERFORMANCE

TO OBTAIN THE MAXIMUM PERFORMANCE AND YIELD
1. Read this entire manual before touching slicer and strictly follow all instructions and precautions.
THERE IS NO SUBSTITUTE FOR SAFETY!
2. Lubricate the slicer per the instructions on pages 16 and 17.
3. Maintain a sharp knife and replace as necessary. Refer to the knife sharpening procedure on
pages 13 through 15. Globe recommends replacing the knife at approximately 12" diameter.
Never attempt to replace the knife yourself. Contact an authorized Globe service company to
replace the knife.
4. Clean knife prior to sharpening slicer per the instructions on pages 10 through 12.
5. As the knife is sharpened and the diameter is reduced, it will be necessary to have:
a. The table adjusted inward toward the knife in order to maintain a consistent 1/16" clearance
between the table and knife.
b. The sharpener assembly adjusted lower to maintain proper alignment with the knife.
By adequately maintaining your slicer, it will provide years of dependable
service. The only way to damage a Globe slicer is by neglect.
Page 18
FROM YOUR GLOBE SLICER:
We recommend an authorized Globe service company
perform all adjustments and preventive maintenance
(See front cover for service contact information).