Dash Disassembly; Kit Preparation - Metra 95-7366B Instrucciones De Instalación

Dash Disassembly

1. Unclip and remove the factory radio
trim panel including the a/c vents.
(Figure A)
2. Remove (4) Phillips screws
securing the radio and then
remove. (Figure B)
Continue to kit preparation
(Figure A)
(Figure B)
95-7366B
1. Cut the marked area in the
dash cavity. (Figure A)
(Figure A)
2

Kit Preparation

2. Remove (1) 10mm nut holding the
area previously cut in step 1 to
remove the cut-out area.
Continue to kit assembly