3-2
Dirt cup
When to empty
It is recommended that the dirt cup
be emptied before the dirt reaches
the fill line (MAX), or after every use if
preferred.
CAUTION: Very fine materials,
such as face powder or cornstarch,
may seal the filter and cause loss
of suction. When using the cleaner
for this type of dust, empty the cup
and clean the filters often.
3-5
Place bottom of dirt cup in first.
Pivot cup into cleaner body.
Press dirt cup firmly until you hear a
click to ensure that it is locked in
place.
3-8
C
D
Align tab (C) on filter cover with slot
(D). Press cover closed until you
hear a snap.
7
3-3
MAX
How to empty
Disconnect cleaner from electrical
outlet. Do not use the cleaner
without dirt cup or filters in place.
Press dirt cup release button (B)
and pivot cup out.
Cleaning filters
Lifetime HEPA filter
If you wish to clean this filter, it may
be removed and cleaned.
3-6
A
Press on the tab (A) located on the
side of the filter cover to remove.
Dirt cup filter
assembly
How to clean
Disconnect cleaner from electrical
outlet. Do not use cleaner without
dirt cup or filters in place.
3-9
A
Remove dirt cup as described in
Fig. 3-3.
Twist dirt cup lid (A) counterclock-
wise until arrows on lid and dirt cup
align. Remove lid with filter cartridge
from dirt cup.
B
3-4
C
Holding dirt cup over trash recep-
tacle, press dirt cup door release
rod (C) on back of dirt cup to open
dirt cup door (D).
Empty dirt cup.
Close and snap dirt cup door shut.
3-7
B
Remove the HEPA filter (B) and
brush with the combination tool to
clean or tap side of filter against a
trash receptacle. Return the HEPA
filter into the filter cavity.
3-10
Dirt and debris can then be cleaned
from the filter cartridge by brushing
with the cleaner's combination tool.
D