cecotec Ready Warm 5250 Swing Box Ceramic Manual De Instrucciones página 25

Temperature adjustment:
Only by remote control.
• Press to switch on the appliance.
• Use the and
the temperature is being set, the °C symbol will light up.
• Press to cancel the temperature setting, and select
for maximum-power heating. The ºC symbol will turn off.
• The appliance will automatically switch to maximum-power heating when the room
temperature is 4 ºC below the set one.
• The appliance will automatically switch to low-power heating when the room
temperature is between 0 and 2 ºC below the set one.
• The appliance will automatically turn off when the room temperature is above the set
one. The fan will operate for 30 seconds in order to cool down the device and will then
switch to standby mode. If the room temperature falls 2 ºC below the set one, it will
automatically turn on again.
• Turn ON and turn OFF (control panel and remote control)
From standby mode:
• o
- Press to set the desired time at which you desire the product to turn on, from 1 to 12
hours (the symbol will light up).
- The display will show the countdown. At the set time, the product will turn on and operate
automatically.
- If no temperature or programme is scheduled, the product will operate and turn off
automatically after 12 hours.
buttons to select the desired temperature from 10 °C to 49 °C. While
for low-power heating or
READY WARM 5250 SWING BOX CERAMIC
ENGLISH
25