Site Preparation - Style selections DETA288-92 Instrucciones De Instalación

INITIAL INSTALLATION INSTRUCTIONS
NOTE: This package contains shower side walls that require a back wall to complete the
entire unit. Installation begins with the back wall (using separate detailed instructions) and
proceeds to the side walls.

1. SITE PREPARATION

Shower wall assembly requires a square stud pocket
constructed to the dimensions shown. Exact stud
placement within the boundaries of these dimensions
is not critical using the adhesive method of installation.
When using hanging rail method, any deviation from
this layout will result in the inability to use this system
without adjustments being made to the existing stud
pocket. See Modification to Stud Layout in HANGING
METHOD INSTALLATION INSTRUCTIONS on page 6.
NOTE: If adhesive method is being used, the hanging
rails applied to the shower panels will not interfere with
this method. Therefore, no alterations to the panels
are required.
1
6 in.
32 in.
4
16 in. 16 in. 16 in.
10 in. 10 in.
12 in. 12 in.
10 in. 10 in.
60 in.
Lowes.com
6 in.