CARE AND MAINTENANCE
Wipe the surface with a damp cloth or sponge. For basic stains, clean with mild detergent or general
purpose cleaner. For cleaning corners and seams, spray with mildew cleaner. With regular
maintenance spraying there should be no need to scrub any silicone caulk joints.
TROUBLESHOOTING
PROBLEM
Panels not sticking
to wall.
Panels not fitting
properly.
WARRANTY
The manufacturer provides a LIMITED TEN (10) YEAR WARRANTY for its solid surface tub and
shower surrounds to be free of manufacturing defects in materials and workmanship. If this product
is found to be defective in materials or workmanship, after inspection by an authorized
representative, we will repair, or at our option, exchange the product for a similar model. This
warranty is valid for a period of ten (10) years, so long as it remains in use in its original place of
installation.
This warranty covers only products installed in accordance with the installation instructions, used as
recommended and not damaged due to misuse, abuse or improper installation. It does not apply to
any seams or changes made to the product by professional tradesmen or fabricators.
The warranty applies only to the original purchaser and installation of these products in residential
applications. It does not apply to commercial applications.
The manufacturer's option to repair or exchange the products under this warranty does NOT cover
any labor or other costs of removal or installations, nor shall the manufacturer be responsible for
any other incidental or consequential damages attributable to a product defect or to the repair or
exchange of a defective product.
POSSIBLE CAUSE
1. Surfaces not properly prepared for
silicone adhesive/sealant.
2. Wall surface not flat for proper
adhesion.
Existing wall surfaces out of plumb.
CORRECTIVE ACTION
1. Clean surface thoroughly and
reapply adhesive.
2. Use wood bracing support to
form panel to wall surface.
Correct stud pocket to required
specifications.
9
Lowes.com