MSA Latchways PRD R20 Instrucciones De Usuario página 4

EN
Latchways PRD descender device certificate of conformity
Date of first use*:
Periodic examination log (page 172)
To be completed by a Competent person at least every 12 months from the date of first use* and
retained. Periodic examinations are an important element for maintaining product safety and shall
be completed in accordance with Latchways instructions. Latchways PRD descender device's
scheduled for examination shall be withdrawn from service.
Approved harnesses shall be examined in accordance with the Approved harness manufacturers'
instructions.
A
See completed example below for guidance.
1 2
Inspected by
Date
(block capitals)
21 10 15 D. HEARSON
dd / mm / yy
Latchways PRD descender device label product markings
B
Descent device label (see page 169)
C
Serial number label (see page 169)
D
Backpack label (see page 169)
E
Date of next examination label (see page 169)
Model
1
Manufacturer
2
Applicable standards
3
ATEX
4
Read the manual
5
Max descent height
6
Operating instructions:
9
1. Check before each use and follow the manufacturer's instructions.
2. Avoid descending into electrical, thermal or chemical sources or other hazrads.
3. Check the ground below is clear of obstructions and sharp edges and a safe landing is possible.
4. Open flap on right shoulder.
5. Pull cord sharply.
6. Bend knees and prepare for landing.
*Date of first use shall be administratively provable. Where the date of first use is unknown, then the next
previous administratively provable date shall be used, e.g. date of purchase or date of manufacture.
4
(page 2) The date the unit is removed from the packaging.
3
Signature
User weight
7
Operating temperature
8
Operating instructions
9
Serial number
10
Notified body
11
Next examination date
12
4
Examination completed/
comments
PASSED
✓
✓
Date of manufacture
13
Part number
14
Examine at least annually
15
No modifications or repairs
16
For single user
17
For single descent
18
5
Date of next
examination
21 10 16
dd / mm / yy