Focal TRIO6 BE Manual Del Usuario página 3

Ocultar thumbs Ver también para TRIO6 BE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
READ FIRST !
IMPORTANT SAFETY INSTRUCTIONS !
The lightning flash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of uninsu-
lated "dangerous voltage" within the prod-
uct's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
1. Read these instructions.
2. Keep these instructions.
3. Take these warnings into consideration.
4. Follow all the instructions.
5. Do not use this equipment around water.
6. Only clean with a dry cloth.
7. Do not cover ventilation outlets. Follow
manufacturer's instructions when installing the
equipment.
8. Do not install the equipment near a source
of heat, a cooker, a heating duct or other
equipment (including amplifiers) which gives
off heat.
9. Respect safety instructions for power cable.
The power cable has two prongs, one of which is
larger than the other. A grounded cable has two
prongs as well as a third which is the grounding
prong. The largest or third prong is there for
your safety. If the power cable doesn't fit your
power socket, seek the advice of an electrician
and replace the old power socket.
10. Make sure the cable cannot be stepped on,
crushed or pinched. Extreme care must be paid
to the plug and the connection of the cable to
the equipment.
11. Only use accessories recommended by the
manufacturer.
12. Only use handling equipment, legs, tripods,
supports or tables recommended by the
manufacturer or those sold with the equipment.
When using a cart, take extra care when moving
the cart and equipment to avoid injury in case
something falls.
13. Disconnect the equipment in case of a
thunderstorm or if left unused for extended
periods of time.
Caution : to prevent the risk of electric shock, do
not remove cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service
personnel.
14. All maintenance must be carried out by a
qualified professional. Maintenance is required
following any damage caused to the equipment
such as deterioration of the power cable or plug,
spillage of liquid or insertion of objects inside
the equipment, exposure to rain or humidity,
poor functioning or physical damage.
15. Do not use any accessories which aren't
recommended by the manufacturer to avoid any
risk.
16. This product should only be connected to
the type of power supply as indicated on the
label on the equipment. In case of uncertainty
as to the type of power supply of your electrical
installation,
consult
the
manufacturer
the product or your electricity provider. For
equipment requiring a battery or another power
source, consult the user manual.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accom-
panying the product.
17. Do not overload power sockets, extension
cables or power strips. This could lead to fire or
electric shock.
18. Never insert objects in the ventilation outlets
of the equipment. The object may come in con-
tact with components exposed to high voltages
or cause short-circuiting and lead to fire or elec-
tric shock. Never spill liquid on the equipment.
19. Never try to repair this equipment yourself;
opening the equipment may expose you to high
voltages or other risks. For all maintenance,
consult a qualified professional.
20. In case a replacement part is required, make
sure the maintenance technician uses parts
of
specified by the manufacturer or which have
identical specifications to the original part. Non-
compliant parts may lead to fire or have other
risks.
21. Following any intervention or repair to the
equipment, ask the technician to carry out tests
to verify the product works safely.
22. The equipment must not be mounted to the
wall or ceiling unless the manufacturer has
intended it to, and only depending on antenna
cables.
23. The ON/OFF switch situated at the back of
the product is the power supply cut-off device.
The equipment must always be accessible to the
user.
24. Do not expose to dripping water or splashing.
25. CAUTION : May cause an explosion if battery
is incorrectly replaced. Replace only with the
same or equivalent type.
GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Trio6 be

Tabla de contenido