Basic Functions - Philips AZ1570/05 Manual De Instrucciones

BASIC FUNCTIONS

SWITCHING ON AND OFF
• Adjust the POWER slider to the desired sound source: CD,
TUNER or TAPE.
• The set is switched off when the POWER slider is in the
TAPE/OFF position and the keys on the tape deck are released.
– The volume, sound settings and tuner presets will be retained
in the set's memory.
ADJUSTING VOLUME AND SOUND
1. Turn the VOLUME/ SOUND CONTROL CENTER control
clockwise to increase or anti-clockwise to decrease volume on
the set.
™ Display shows the volume level indication, VOL and a number
from 0-32.
2. To adjust the bass, mid and high frequency levels, press
DIGITAL EQUALIZER once or more until the desired option is
displayed. While the option is shown, turn the VOLUME/
SOUND CONTROL CENTER control to increase or decrease
(- 5 to + 5 steps maximum) the desired tone.
™ VOLUME can also be adjusted in this way with a level range
from 0-32.
3. Press DIGITAL DBB to switch dynamic bass boost on or off.
™ If on, the DIGITAL DBB light goes on.
4. Press INCREDIBLE SURROUND to switch the surround sound
effect on or off.
™ If on, the INCREDIBLE SURROUND light goes on.
Note: The effect of INCREDIBLE SURROUND may vary with
different types of music.
TUNING TO RADIO STATIONS
1. Select TUNER source.
™
is displayed briefly and then the radio station
frequency is shown.
2. Press BAND once or more to select your waveband.
3. Press SEARCH ∞ or § and release when the frequency in
the display starts running.
™ The TUNER automatically tunes to a station of sufficient
reception. Display shows
™ If an FM station is received in stereo,
4. Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH ∞ or § briefly and
repeatedly until you have found optimal reception.
6
during automatic tuning.
is shown.
STEREO
DIGITAL TUNER
+
•
•
•
•
0
•
•
•
•
–