Programming Track Numbers - Philips AZ1570/05 Manual De Instrucciones

Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during
playback. The play modes can also be combined with PROGRAM.
SHUFFLE - tracks of the entire CD/ programme are played in
random order
SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme
REPEAT ALL - to repeat the entire CD/ programme
REPEAT and SHUFFLE REPEAT - plays the current (random) track
1. To select your play mode, press the SHUFFLE or REPEAT
button before or during playback until the display shows the
desired function.
2. Press PLAY•PAUSE 2; to start playback if in the STOP
position.
• Playback starts immediately if you have selected a SHUFFLE
mode.
3. To return to normal playback, press the respective SHUFFLE or
REPEAT button until the various SHUFFLE / REPEAT modes are
no longer displayed.
– You can also press STOP 9 to cancel your play mode.

Programming track numbers

Programme in the STOP position to select and store your CD tracks
in the desired sequence. If you like, store any track more than once.
Up to 20 tracks can be stored in the memory.
1. Press SEARCH ∞ or § once or more to select your desired
track number.
2. Press PROG.
™ Display:
and the selected track number.
PROG
briefly.
™ If you attempt to programme without first selecting a track
number,
3. Repeat steps 1-2 to select and store all desired tracks.
™
is displayed if you attempt to programme more than
20 tracks.
4. To start playback of your CD programme,
press PLAY•PAUSE 2;.
Note: if you have selected the tracks during CD playback, first
press STOP 9 then PLAY•PAUSE 2;.
continuously in random order
continuously
is shown.
appears
CD PLAYER
9