Abicor Binzel PSB 31 Instructivo De Servicio página 20

EN Translation of the original operating instructions
The manufacturer reserves the right, at any time and without prior notice, to make such changes and
amendments to these operating instructions as become necessary due to misprints, inaccuracies or
product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at
www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Special warnings for operation
2.4 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
5 Putting into operation
5.1 Functional description
5.2 Manual cutting torch
5.3 AUT cutting torches
5.4 Setting up the torch body
5.5 Connecting the plasma cutting
torch
5.5.1 Compressed air as plasma
and cooling gas
5.5.2 Filtered compressed air free
of oil and water
5.6 Plasma cutting torch with a
central connector
5.7 Cutting process
EN - 2
EN-3 6
EN-3 6.1
EN-3 7
EN-3
EN-4 8
EN-4 8.1
EN-5 8.2
EN-5 9
EN-5
EN-7 10
EN-8
EN-8
EN-8
EN-8
EN-9
EN-9
EN-10
EN-10
EN-13
EN-14
EN-14
EN-14
EN-15
Control elements
Igniting the torch
Putting out of operation
Maintenance and cleaning EN-16
Cable assembly
Cutting torch
Troubleshooting
Disposal
PSB
EN-15
EN-15
EN-16
EN-17
EN-17
EN-17
EN-19