Emergency Information; Product Description; Technical Data - Abicor Binzel PSB 31 Instructivo De Servicio

PSB

2.4 Emergency information

3 Product description

3.1 Technical data

Plasma cutting/gouging
Relative humidity
Tab. 1
Ambient conditions during operation
Storage in a closed environment, ambient temperature
Ambient temperature for shipment
Relative humidity
Tab. 2
Ambient conditions for transport and storage
Application process
Type of use
Type of voltage
Protection type of the device connections
Tab. 3 General torch data (EN 60974-7)
In the event of an emergency, immediately disconnect the following supplies:
• Power, gas
Further measures can be found in the operating instructions for the power
source or the documentation for other peripheral devices.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and
material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without
authorisation.
• The device must only be used by qualified personnel (in Germany,
see TRBS 1203).
3 Product description
–10°C to +40°C
Up to 90% at 20°C
–10°C to +40°C
–25°C to +55°C
Up to 90% at 20°C
PSB 31
PSB 60
PSB 121
Plasma cutting, plasma gouging
Manual
DC direct voltage
IP3X (EN 60529)
AUT PSB 60
AUT PSB 121
Automatic
IP2X (EN 60529)
EN - 5