WARNING
Chose a mounting position where all electric wires are protected from being damaged by sharp edges, heat or other conditions.
+24 Volt DC electrical connections must be fused on the battery side. Make sure your radio and all other devices will be turned off
while connection your system.
If you need to replace the power fuse, replace it only with a fuse identical to that supplied with the system. Using a fuse of
different type or rating may result in damage to this system which isn't covered by the warranty.
Please do only use in 24 Volt systems! 12 Volt use may result in a defect of your system and / or the amplifier!
CONTROLS AND FUNCTIONS
- 3 -