Ventilation System - Nolan N60-5 Seguridad E Instrucciones

N60-5
2 REMOVING SPACE FOR THE EYEWEAR
2.1 Remove the left cheek pad from the helmet (see instructions above).
2.2 Unhook the eyelet "A" on the rear frame of the corresponding cheek pad at the
upper press stud on the back (Fig.12).
2.3 Remove the upper flap "B" of the frame from the loop on the back of the frame
itself (Fig.12).
2.4 Correctly insert part of the previously-removed padding inside the cheek pad fab-
ric lining cover (Fig.13).
2.5 Insert the upper flap "B" of the frame into the loop on the back of the cheek pad
and reattached the eyelet "A" at the top press stud on the back (Fig.12).
2.6 Reattach the complete cheek pad in the helmet (see instructions above).
2.7 Repeat the same process with the right cheek padding.
WIND PROTECTOR
(Available as standard or accessory/spare part)
This accessory allows improved helmet performance under certain conditions of use.
The Wind Protector reduces unpleasant infiltrations of air under the chin.
See Fig.14 for the assembly and disassembly.

VENTILATION SYSTEM

The ventilation system of the helmet consists of:
Lower Ventilation System
It allows ventilation in the mouth area and conveys the air directly on the visor reducing
fogging.
See Fig.15 for opening and closing operations.
Top Ventilation System
The innovative AIRBOOSTER TECHNOLOGY system channels the air coming from
the front air intake by directing it in the top area of the rider's head without any dis-
persion.
See Fig.16 for opening and closing operations.
Rear Ventilation System
It allows warm and stale air to flow out ensuring an optimum comfort inside the helmet
(Fig.17).
16
INSTRUCTIONS FOR USE