Ventilation System - Nolan X-lite X-801 Instrucciones De Utilizacion

2.6 Cleaning
Inner fabric padding:
- Delicately hand wash and use only neutral soap and water
with a maximum temperature of 30°C.
- Rinse in cold water and dry at room temperature away from
direct sunlight.
Important!
Never machine-wash the inner comfort padding
Inner polystyrene:
- Clean only with a damp cloth then leave it to dry at room tem-
perature away from direct sunlight.
Important!
- The inner polystyrene can easily be deformed. Its function is
to absorb impacts by deformation and partial destruction.
- DO NOT MODIFY IN ANY WAY HELMET'S INTERNAL POLY-
STYRENE COMPONENTS.
- NEVER USE PETROL, THINNERS, BENZOL OR OTHER SOL-
VENTS AND/OR CHEMICAL SUBSTANCES.

3. Ventilation system

3.1 Lower ventilation system (fig. 6)
Adjustable, it channels air directly inside the helmet and onto the
inner surface of the visor reducing the formation of condensation
to a minimum even at low speeds. To open the lower air intakes
- 22 -
move the central slider upwards. The side ports will open out-
wards at the same time channeling external air directly onto the
inner surface of the visor. To close the front air intakes, move the
central slider downwards.
6
3.2 Top ventilation system (fig. 7)
The top ventilation system allows air into the helmet providing
excellent climate control and preventing local infiltration of cold air.
To activate the ventilation system, move the sliders forwards. The
air intake ports will lower allowing air in.
To stop air flow push the sliders backwards.
7
- 23 -