Technical Data - Milwaukee M18 FBS85 Manual Original

TECHNICAL DATA

Production code...........................................................................
No-load speed .............................................................................
Blade size ....................................................................................
Cutting capacity rectangular stock...............................................
Cutting capacity Pipe ...................................................................
Battery voltage.............................................................................
Weight according EPTA-Procedure 01/2014 (2.0 Ah...12 Ah) .....
Recommended ambient operating temperature ..........................
Recommended battery types.......................................................
Recommended charger ...............................................................
Noise/vibration information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))..........................
Sound power level (Uncertainty K=3dB(A)) ..............................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 60745.
Sawing of metal
Vibration emission value a
Uncertainty K= ..........................................................................
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for
diff erent applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may
signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise such as: maintain the
tool and the accessories, keep the hands warm, organization of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
BAND SAW SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting accessory
contacting a „live" wire may make exposed metal parts of
the power tool „live" and could give the operator an electric
shock.
Wear ear protectors. Exposure to noise can cause
hearing loss.
Always place the guide shoe on the workpiece when
sawing.
Do not start the blade when in contact with workpiece. Wait
for blade to reach full speed before beginning cut.
When blade is binding, or when interrupting a cut for any
reason, release the trigger and hold the cutter motionless
in the material until the blade comes to a complete stop.
Never restart the machine when the blade in contact with
workpiece.
Do not use cracked or distorted saw blades.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses
when working with the machine. The use of protective
clothing is recommended, such as dust mask, protective
gloves, sturdy non-slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to
health. Do not inhale the dust. Wear a suitable dust
protection mask.
24 ENGLISH
470 324 - M18FBS85.indd 24 470 324 - M18FBS85.indd 24
CORDLESS BAND SAW
......................................................
h
M18FBS85
.....................4746 78 01 ...
...000001-999999
.................0-164,59 m/min
...... 899 x 13 x 0,51 mm
................... 85 x 85 mm
........................ø 85 mm
...........................18 V
..................3,9...5,0 kg
...................... -18...+50 °C
................... M18B...M18HB
M12-18C, M12-18AC, M12-18FC, M1418C6
......................82,63 dB (A)
......................93,63 dB (A)
........................1,38 m/s 2
........................1,50 m/s
2
Do not machine any materials that present a danger to
health (e.g. asbestos).
Switch the device off immediately if the insertion tool stalls!
Do not switch the device on again while the insertion tool is
stalled, as doing so could trigger a sudden recoil with a
high reactive force. Determine why the insertion tool stalled
and rectify this, paying heed to the safety instructions.
The possible causes may be:
• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
• the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
WARNING! Danger of burns
• when changing tools
• when setting the device down
Chips and splinters must not be removed while the
machine is running.
When working in walls ceiling, or fl oor, take care to avoid
electric cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors off er to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
06.12.2019 16:45:12 06.12.2019 16:45:12