Technical Data; Noise/Vibration Information; Safety Instructions - Milwaukee MS 216 SB Manual Del Usuario

TECHNICAL DATA

MS 216 SB
Rated input ................................................................................................................................1800 W .....................................1650 W
Amps ............................................................................................................................................ 8,4 A .........................................15 A
No-load speed ............................................................................................................................6000 min
Saw blade dia. x hole dia ...................................................................................................... 216 x 30 mm ............................ 216 x 30 mm
Saw blade thickness ..................................................................................................................... 1,5 mm .....................................1,5 mm
Cutting width
Mitre 0°/ Bevel 0° ............................................................................................................. 60 x 270 mm ............................ 60 x 270 mm
Mitre 45°/ Bevel 0° ........................................................................................................... 60 x 190 mm ............................ 60 x 190 mm
Mitre 0°/ Bevel 45° ........................................................................................................... 48 x 270 mm ............................ 48 x 270 mm
Mitre 45°/ Bevel 45° ......................................................................................................... 48 x 190 mm ............................ 48 x 190 mm
Min. workpiece dimensions ............................................................................................130 x 35 x 2 mm .......................130 x 35 x 2 mm
Weight according EPTA-Procedure 01/2003 ................................................................................14,5 kg ......................................14,5 kg

Noise/Vibration Information

Measured values determined according to EN 61029. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) ............................................................................................92,5 dB (A) ...............................92,5 dB (A)
Sound power levell (K = 3 dB(A))..............................................................................................105,5 dB (A) .............................105,5 dB (A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 61029.
Vibration emission value a
h
Sawing of wood ........................................................................................................................... 3,2 m/s
Uncertainty K = ........................................................................................................................... 1,5 m/s
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING
Read all safety warnings and all instructions, including
those given in the accompanying brochure. Failure to follow
the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing loss.
Appliances used at many different locations including open air should
be connected via a residual current device (FI, RCD, PRCD) of 30mA
or less.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
Always disconnect the plug from the socket before carrying out any
work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
220-240 V
2
2
Sawdust and splinters must not be removed while the machine is
running.
Never reach into the danger area of the plane when it is running.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
Always use the protective shields on the machine.
Do not clamp the protective swing guard.
Do not use saw blades which are damaged or deformed
Replace the table insert when worn
Do not use saw blades not corresponding to the key data given in
these instructions for use.
Any faults with the machine, including any related to the safeguard
or the saw blades, must be reported to the persons in charge of safety
as soon as the faults are discovered.
It is necessary to select a saw blade which is suitable for the material
being cut.
Never use the mitre saw to cut materials other than those specified in
the instruction manual.
Mitresaw
110-120 V
...............................6000 min
-1
....................................3,2 m/s
....................................1,5 m/s
English
-1
GB
2
2
21