OPERATING INSTRUCTION
How to insert the Batteries
1
Remove the battery cover by pulling it
according to the arrow direction.
2
Insert new batteries making sure that the
(+) and (-) of battery are installed correctly.
3
Reattach the cover by sliding it back into
position.
NOTE
!
• Always use/replace both batteries of
same type.
• If the system is not to be used for a
long time, remove the batteries to save
their working life.
• If the display screen of remote
controller starts, fading replace both of
the batteries.
OPERATING INSTRUCTION
Wireless Remote Controller
Maintenance
1
Choose a suitable place where its safe &
easy to reach.
2
Fix the holder to wall etc with the supplied
screws firmly.
3
Slide the remote controller inside the
holder.
NOTE
!
• Remote controller should never be
exposed to direct sunlight.
• Signal transmitter & receiver should
always be clean for proper
communication. Use a soft cloth to
clean them.
• In case some other appliances also get
operated with remote control, change
their position or consult your
serviceman.
Operating Method
1
The signal receiver is inside the unit.
2
Aim the remote controller towards the unit
to operate it. There should not be any
blockage in between.
11