Led Display; Checking The Charge Level - Silvercrest SPB 2600 C2 Instrucciones De Uso

♦ Connect the USB plug of the charger cable
to a switched-on PC or a USB power supply
(not supplied).
♦ Connect the microUSB plug of the charging cable
to the microUSB charging port
Power Bank. An estimate of the charge level is
shown by means of the charge level LEDs

LED display

One LED is flashing
One LED is on, the second LED
is flashing
Two LEDs are on, the third LED
is flashing
Three LEDs are on, the fourth LED
is flashing
All LEDs are on

Checking the charge level

You can also check the charge level of the Power
bank when it is not charged or is being used for
charging.
♦ Press the ON/OFF button
show the current charge level of the Power bank
for about 30 seconds.
│
■ 56
GB │ MT
on the
Charge level
< 20%
20–49%
50–74%
75–97%
98–100%
briefly. The LEDs
SPB 2600 C2
.