cecotec GRANDHEAT 2500 Manual De Instrucciones página 46

ENGLISH
leave the microwave open to ensure good ventilation. In such case, it is recommended to heat
a glass of water at high power for several times.
Warning: Do not try to remove the wave guide.
3. OPERATION
Using the microwave
When the device is plugged in, a beep will sound and the display will show "WELCOME" for 2
seconds. Press Stop/Cancel, the display will show "1:01".
During cooking, press Stop/Cancel to pause the device, or press it twice to cancel.
During cooking setting mode, if there is no operation within 1 minute, the microwave will return
to standby mode.
After a cooking program has been finished, the display will show "End" and will beep every 2
minutes. Press Stop/Cancel or open the door to stop the beeping.
Setting clock time
The microwave has a 24-hour or 12-hour clock. To set the clock, press the Clock button.
Example: Setting microwave clock to 8:30.
In standby mode, press the Clock button once to select the 12-hour cycle.
The display will show alternately "--SET HOUR--" and " HOUR 12".
Turn the Menu/Time knob to set 8 hours. If there is no operation within 2 seconds, the display
will show alternately "--PRESS CLOCK--", "--SET MINUTE--" and "8:00".
Press the Clock button once to confirm the hour setting. After 2 seconds, the display will show
alternately "--PRESS CLOCK--" and " 8:00".
Turn the Menu/Time knob to set 30 minutes.
Press the Clock button once to confirm the setting.
During operation, press the Clock button once to display the current time.
Microwave cooking
For microwave cooking, just press the power level button repeatedly to select the desired
cooking power level, and then use the Menu/Time knob to set a desired cooking time. The
maximum cooking time is 90 minutes.
Select the desired power level by pressing the power level button.
Press the power level button
Once
Twice
3 times
46
GRANDHEAT 2500 BUILT-IN STEEL
Cooking power
900 W
750 W
450 W