Publicidad
Enlaces rápidos
LBP - Loadblock Plus
ﺗﻌﻠﻳﻣﺎﺕ ﺍﻟﺗﺷﻐﻳﻝ
v1.00
Part No:
THIS MANUAL WAS WRITTEN IN THE ENGLISH LANGUAGE AND PROFESSIONALLY
SU3401
TRANSLATED TO ALL OTHER LANGUAGES CONTAINED WITHIN THIS DOCUMENT.
PLEASE NOTE THAT STRAIGHTPOINT ACCEPT NO RESPONSIBILITY FOR ANY ERRORS OR
OMISSIONS.
Publicidad
Resumen de contenidos para Crosby LBP - Loadblock Plus
- Página 1 LBP - Loadblock Plus ﺗﻌﻠﻳﻣﺎﺕ ﺍﻟﺗﺷﻐﻳﻝ v1.00 Part No: THIS MANUAL WAS WRITTEN IN THE ENGLISH LANGUAGE AND PROFESSIONALLY SU3401 TRANSLATED TO ALL OTHER LANGUAGES CONTAINED WITHIN THIS DOCUMENT. PLEASE NOTE THAT STRAIGHTPOINT ACCEPT NO RESPONSIBILITY FOR ANY ERRORS OR...
- Página 2 01-04 General description and warnings 05-06 LBP fitting batteries 07-09 LBP keypad and annunciators LBP annunciators Using a compression load cell LBP measuring a load LBP preset tare 14-15 User configurable settings LBP optional slave display 17-18 Product aftercare Service and calibration Warranty Notes v1.00...
- Página 3 All products manufactured and sold by Straightpoint Ltd, are sold with the express understanding that the purchaser and user are thoroughly familiar with the safe use, proper care and application of the product. Responsibility for the safe use, proper care and application of the product rests with the user. Failure of the product can occur due to misapplication, abuse, overloading, or improper care and maintenance.
- Página 4 Todos los productos que fabrica y vende Straightpoint Ltd se venden sabiendo explícitamente que el comprador y el usuario son plenamente conocedores de utilizar el producto de forma segura, cuidarlo y emplearlo. El usuario es responsable de utilizarlo de forma segura, cuidarlo y emplearlo. El mal funcionamiento del producto puede deberse a un uso indebido, abuso, sobrecarga, o cuidado y mantenimiento inadecuados.
- Página 5 Straightpoint Ltd Straightpoint Ltd : ASME B30.26-2010 « ». Straightpoint Ltd, Straightpoint Ltd Straightpoint Ltd. Straightpoint Ltd Straightpoint Ltd Όλα τα προϊόντα που κατασκευάζονται και πωλούνται από τι Straightpoint Ltd, πωλούνται ε τη ρητή επιφύλαξη ότι ο αγοραστή και ο χρήστη είναι πλήρω εξοικειω ένοι ε την ασφαλή χρήση, την κατάλληλη φροντίδα και την εφαρ ογή του προϊόντο . Η...
- Página 6 Alla produkter som tillverkas och säljs av Straightpoint Ltd säljs med uttryckliga hänvisningar om att köparen och användaren har god kännedom om säker användning, skötsel och tillämpningen av produkten. För säker användning, skötsel och tillämpningen av produkten ansvarar användaren. Felaktig användning, missbruk, överbelastning eller felaktig skötsel och underhåll kan leda till att produkten fördärvas. Det finns många statliga standarder och branschstandarder som omfattar produkterna som tillverkas och säljs av Straightpoint Ltd .
- Página 7 Before using the Loadblock Plus take some time to read this manual and familiarise yourself with it. The Loadblock Plus is supplied with a single 9v PP3 battery – this needs to be fitted before use. Fit the battery supplied by removing the two cross head screws which retain the battery cover. Avant d’utiliser le Loadblock Plus, prenez le temps de lire ce manuel et de vous familiariser avec son contenu.
- Página 8 Fit battery and refit cover making sure all seals are intact. When the battery is getting low (22% remaining), “LOBAT” will appear in the top left of the display, when this happens, it should be replaced with an alkaline 9 volt PP3, MN1604, 6F22 or equivalent. * If using optional HHP display, refer to SU3343 manual.
- Página 9 Press this button for three seconds to turn the device on and off. The device will switch itself off if the load does not change for 20 minutes. Pour allumer ou éteindre l’appareil, maintenez ce bouton appuyé pendant trois secondes. Après 20 minutes, si la charge reste inchangée, l’appareil s’éteindra automatiquement.
- Página 10 Press this button to initialise the peak hold facility. Once pressed, the display with show ‘PH’. This will make the display ‘freeze’ at the highest load recorded. Press the key again to switch off this function. Appuyez sur ce bouton pour initialiser le système de maintien de la valeur de crête. L’écran d’affichage indiquera alors ‘PH’.
- Página 11 Premere questo tasto per cambiare le varie unità di misura. Selezionare tra T- tonnellate, kN- kiloNewton, kg-kilogrammi o lb-libbre. L’unità selezionata è mostrata sul display. Druk op deze knop om de verschillende meeteenheden te bekijken en te selecteren. U kunt kiezen uit T (ton), kN (kilonewton), kg (kilogram) en lb (pond). De geselecteerde meeteenheid wordt op het scherm getoond.
- Página 12 Displays when the internal PP3 battery has 22% capacity remaining. Displays when the device is reading in tonnes. Displays when the device is in peak hold mode. Displays when the device is reading kilograms. Displays when the device is reading in kilonewtons. Displays when the device is reading in pounds.
- Página 13 Place the loadcell on a base plate or surface that is sufficiently strong enough to withstand the load that will be applied. This mounting surface should be flat, smooth and level. The top of the Loadblock is domed - packing plates or a loadcap may be required to protect the item being loaded onto the Loadblock. Placer le capteur de charge sur une embase ou une surface suffisamment solide pour supporter la charge appliquée.
- Página 14 Ensure that the device is switched on 10 minutes before loading, this will allow the temperature stability circuitry to acclimatise. Apply the load SLOWLY and watch the display on the device to ensure that the load applied is not greater than you had estimated. Avoid shock loads. After use, switch off and, if removing the device from the test site, clean and store, ideally in a Straightpoint carry case.
- Página 15 You may require to preset the tare on this device if, for instance, the tare button is not accessible because of a load placed on the Loadblock. First, press the button to put the device into net mode. By pressing the buttons, the tare will increase.
- Página 16 To adjust To exit To adjust DOWN To adjust To exit To adjust DOWN v1.00 Exit menu Part No: without changes SU3401...
- Página 17 This device is programmed with three user configurable settings: ALSET - The percentage of full load that the audible alarm will sound. AOSET - The amount of minutes with a button being pressed before the device will automatically switch off. This feature is disabled if set to zero.
- Página 18 If using the Handheld plus as optional cabled handheld display, plug it into the output port on the rear of the Loadblock Plus shown to the left. Please refer to user manual SU3343 for correct use of the Handheld plus. Si vous utilisez la télécommande Handheld Plus comme affichage déporté...
- Página 19 These devices are sealed to IP65/NEMA4X standards, so must not be immersed in water. The effects of solvent on the device can not be guaranteed, and should therefore be avoided. Avoid use within 20-30 minutes of rapid changes in temperature, for example moving the device from a cold vehicle into a warm room. The change in temperature can affect the accuracy of the device.
- Página 20 IP65/NEMA4X, 20-30 +50°C ( 14 122°F). «OVERLOAD» Αυτέ οι συσκευέ σφραγίζονται ε τα πρότυπα IP65/NEMA4X, οπότε δεν θα πρέπει να βυθίζεται στο νερό. Η επίδραση διαλύτη στη συσκευή δεν είναι εγγυη ένη και θα πρέπει επο ένω να αποφεύγεται. Αποφύγετε τη χρήση εντό 20-30 λεπτών γρήγορων εταβολών θερ οκρασία , για παράδειγ α, ετακινώντα τη συσκευή από ένα παγω...
- Página 21 These products are supplied with a certificate of calibration which is valid for one year. After this date, it is recommended the device is recalibrated by Straightpoint or an approved calibration laboratory. Contact the Straightpoint service department or your supplier for more information. In the unlikely event of this device failing, fit new batteries and re-test.
- Página 22 Straightpoint (UK) Ltd warranty this product against malfunction for a period of two years from manufacture. Conditions of warranty: 1) The equipment is used as described exactly in the operators manual supplied. 2) Whilst we make every effort to ensure each device is calibrated before despatch, Straightpoint (UK) Ltd do not accept responsibility for inaccurate readings indicated by this equipment. 3) In the event of malfunction, the device is returned to the manufacturer: Straightpoint (UK) Ltd, Unit 9 Dakota Park, Havant, Hampshire, UK, PO9 2NJ.
- Página 23 v1.00 Part No: SU3401...
- Página 24 Crosby | Straightpoint Unit 9, Dakota Park, Downley Road, Havant, Hampshire, PO9 2NJ UK · Tel: +44 (0)2392 484491 2801 Dawson Road, Tulsa, OK 74110 · USA · Tel: +1 (918) 834-4611...