1
1
Attach the foot care head [
• Push down firmly until you hear a "click".
2
2
Press the power switch [
once.
• NORMAL mode is recommended for
rotation speed. (
Page 15)
3
3
Bring the foot care head into contact with the
skin, and begin filing.
• Filing a single location for a long time can cause it to
become hot with friction. To avoid this, be sure to make
small changes in the filing position while filing.
• Filing should be performed about once every two weeks.
The basics of foot care
Do not use the product for filing anything
other than calluses and hardened skin on
the feet.
Callus
A callus is a hardened layer that forms
through repeated pressure or abrasion.
Hardened layer
Epidermis
Derma
18
].
J
K
]
2
2
<Use on>
1
1
Things to be careful of when filing
Before use
• Filing an area too deeply can cause it to become sore or
inflamed.
• Filing too large an area can result in even larger calluses
forming. Therefore, be sure to leave some of the hardened
layer.
Tips for moving the foot care head
Move in the direction indicated by the arrows.
Use your free hand to support filing.
After use
Hardened layer
Epidermis
Derma
Portion to be
removed
Leave some of the
hardened layer