Linksys RE7000 Guia Del Usuario página 15

3. Wait for the blinking indicator LED to change from green to amber.
4. Use an Ethernet cable to connect the range extender to the LAN port of your router.
5. Connect to the Linksys Extender Setup network.
On a computer, phone, or tablet, connect to the Wi-Fi network Linksys Extender Setup –
XXX, where XXX are the last 3 digits of your range extender's MAC address.
6. Launch setup.
Enter http://extender.linksys.com
setup. Be sure to choose "As a wired range extender (access point)" when asked how you
want to use your range extender. Follow the on-screen instructions to create a network
name and password for your access point.
7. Connect your Wi-Fi devices to the extended network you just created.
Select the extended network on your device's Wi-Fi manager. Extended networks are
identified by "_Ext" added to the end of your main network name(s).
Note—If your router's MAC filtering feature is on you must enter the MAC address of the
extender into the list of the router's allowed addresses. That will allow the extender, and
devices connected to extended networks, to connect to the main network.
The MAC addresses of the extender's 2.4GHz and 5GHz radios are identified as Seen By
Upstream AP in the Status > WLAN Statistics screen. The MAC address of the extender's
Ethernet port is identified as Extender Mac Address on the Status > Device Info screen.
Once the extender can access the router, all devices connected to the extender have
access as well.
(or try http://192.168.1.1) in a browser to complete
15