3. Click the extended network name of your range extender (Damaged_Beez2.4_Ext in the
example).
4. Type your wireless network password (Security Key) into the Password field. Click OK
You have intermittent connection problems
Plug in the range extender midway between your router and the area without Wi-Fi. Be sure you
have at least 50% of your router's Wi-Fi signal at that point on the device you used for setup. If
you have two bars or lower, move closer to your router.
To check the signal strength for individual devices connected to the extended network, go to the
Status > WLAN Statistics page in your extender settings and click Wireless Clients Table at the
bottom of the page.
26