How To Access The Settings Interface - Linksys RE7000 Guia Del Usuario

How to Access the Settings Interface

To change or view range extender settings, first connect to an extended network, e.g.,
MyWiFi_Ext. In a browser, go to
Your range extender's default admin password is "admin". It is highly recommended that you
change this after WPS setup.
To change your admin password, click the
new password under
If you have not changed the range extender's default name, you can also access the settings
interface when connected to your main router.
Enter into a browser
or iOS).
—
Note XXX are the last 3 digits of your range extender's MAC address. You can find the MAC
address on the back of your RE7000. (You might have to unplug your range extender to see the
http://extender.linksys.com
Extender Access
.
http://RE7000-XXX
and enter admin password.
Management
tab of the settings interface and enter a
(Windows) or http://RE7000-XXX.local or (Mac OS X
17