SNOWJOE ROOFER JOE RJ204M Guia De Inicio Rapido página 3

EN
Assembling the Roof Rake
and Adjusting the Handle
1. Unscrew the handle knob and extend the pole to expose
the small holes (Fig. 1).
Fig. 1
2. Depress the small buttons at the end of the handle so
that you can insert the handle into the roof rake head
(Fig. 2).
Fig. 2
3. Using the hex key wrench, screw the metal braces to the
roof rake head with the two short hex screws (Fig. 3).
Short hex
screw
Metal
braces
Fig. 3
Hole
Buttons
Short hex
screw
Hex key
wrench
4. Affix the metal braces to the pole by threading the long
hex screw through the metal braces and the pole. Secure
the screw with the locking nut using the open end wrench
(Fig. 4).
locking
nut
Long hex
screw
Fig. 4
5. Lengthen the telescopic pole by rotating the handle knob
clockwise and extending the pole to the desired length.
Secure in position by twisting the knob counterclockwise
(Fig. 5).
Clockwise
to open
Handle
Knobs
Fig. 5
NOTE: If you have any questions, please call the Snow Joe
+ Sun Joe customer service department at 1-866-SNOWJOE
®
(1-866-766-9563) for assistance.
3
Open
end wrench
Counterclockwise
to close
®