Audio-Technica ATH-AP2000Ti Manual Del Usuario página 6

Thank you for purchasing this product. Before using
the product, read through the user manual to ensure
that you will use the product correctly. Please keep this
manual for future reference.
■ Caution
• Follow applicable laws regarding mobile phone and headphone use if
using headphones while driving.
• Do not use the product in places where the inability to hear ambient
sound presents a serious risk (such as at railroad crossings, train
stations, and construction sites).
• To prevent damage to your hearing, do not raise the volume too high.
Listening to loud sound for an extended period may cause temporary or
permanent hearing loss.
• Discontinue use if skin irritation results from direct contact with the
product.
• Do not disassemble, modify or attempt to repair the product to avoid
electric shock, malfunction or fire.
• Be careful to avoid pinching yourself between the housing and the arm
of product.
■ Notes on use
• To ensure compatibility and correct usage, always consult the user
manual of any device before connecting the product to it.
• Audio-Technica will not be liable in any way for any loss of data in the
unlikely event that such losses should occur while using the product.
• On public transport systems or in other public places, keep the volume
low so as not to disturb other people.
• Minimize the volume on your audio device before connecting the
product in order to avoid hearing damage from sudden exposure to
excessive volume.
• When using the product in a dry environment, you may feel a tingling
sensation in your ears. This is caused by static electricity accumulated
on your body, not by product malfunction.
• Do not subject the product to strong impact.
• Do not store the product under direct sunlight, near heating devices
or in a hot, humid or dusty place. Do not allow the product to get wet.
• When the product is used for a long time, the product may become
discolored due to ultraviolet light (especially direct sunlight) or wear.
• The included cable may become caught or severed if the product is
placed in a bag or pocket without adequate protection.
• Connect/disconnect the cable by holding the plug. Pulling directly on
the cable can result in a broken wire and the risk of electric shock.
• The earpads and the headband are made using natural leather. Since the
leather part is made with a soft material, there may be indentations left if
the product is stored with the cable or cord wrapped around it.
■ Care
Get into the habit of regularly cleaning the product to ensure that it will
last for a long time. Do not use alcohol, paint thinners or other solvents for
cleaning purposes.
• Use a dry cloth to clean the headphones.
• After using the included cable, clean it with a dry cloth if sweat or dirt
is present. Failure to clean the cable may cause it to deteriorate and
harden over time, resulting in malfunction.
• Wipe the plugs on included cable with a dry cloth if dirty. Using the
plug without cleaning it can cause sound skipping or distortion.
• To clean the earpads and headband, wipe with a dry cloth. Earpads and
headband may fade if sweat or water dries on them. If the earpads and
headband get wet, we recommend wiping them with a dry cloth and
allowing them to dry in the shade.
• Wipe off dirt from the leather earpads and the headband with a dry
cloth. Do not use a commercial cleaner for leather.
• If sweat or water adheres to the leather earpads and the headband,
their color may fade. If this occurs, we recommend wiping them with a
dry cloth and allowing them to dry in the shade.
• For long-time storage, keep the product in a well-ventilated place
without high temperatures and humidity.
• The earpads deteriorate over time due to use or storage. For information
about replacing earpads or other parts, or for information about other
serviceable parts, contact your local Audio-Technica dealer.
1