Tabla de contenido
Publicidad
• BLOCK1 (128BYTE)
4.1.3. HDMI 2(256 Bytes )
• BLOCK0 (128BYTE)
• BLOCK1 (128BYTE)
Copyright
2008
LG Electronics. Inc. All right reserved.
C
Only for training and service purposes
5. ADC Calibration
5.1 Adjustment of AV
* Required Equipments
• Remote controller for adjustment
• 802F Pattern Generator, Master (MSPG-925FA), etc.
• MSPG-925FA Pattern Generator
(Which has Video Signal: 100% Color Bar Pattern
shown in Fig. 1)
= > Model : 202 / Pattern: 65 (PAL : CH)
Model : 207 / Pattern : 65 (NTSC-J)
5.1.1 Method of Auto AV Color Balance.
1) Press the FRONT-AV KEY on R/C for converting input
mode.
2) Input the Video Signal: 100% Color Bar signal into
AV2(MA/TA)
3) Set the PSM to Dynamic mode in the Picture menu.
4) Press INSTART key on R/C for adjustment.
5) Press the ▶(Vol.+) key to operate the set, then it becomes
automatically
6) Auto-RGB OK means the adjustment is completed
5.1.2 Requirement
• This AV color balance adjustment should be performed
before White Balance Adjustment.
- 11 -
(Fig. 1)
LGE Internal Use Only
Publicidad
Tabla de contenido
