Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS
Input power source
Charging time
Charging voltage
Charging current
Weight
APPLICATIONS
For charging the HITACHI battery type EB1414.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
d
Fig. 2
8
Single phase: AC120V 60Hz
Approx. 60 minutes (EB1414)
14.4V
1.55A
3.5 lbs (1.6kg)
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
1. Insert the battery to the battery charger.
Insert the battery into the battery charger as shown in
Fig. 2. Make sure it contacts the bottom of the battery
charger.
2. Insert the plug of battery charger into the receptacle.
WARNING:
Do not use the electrical cord if damaged. Have it repaired immediately.
Publicidad
Tabla de contenido
