Oki TSP700 Guia De Inicio Rapido página 2

2-5. Installing the Buzzer
Install by hanging the bracket claw on the printer. Tighten the screw.
Note : When attaching the bracket, be careful not to get the buzzer cable caught.
2-6. Connecting the buzzer cable
Plug the buzzer cable into the peripheral drive connector on the back of the printer.
< RT322 >
For OKIPOS 441
1. Parts :
Use the following parts.
Buzzer
2. Mounting procedures :
Note :
Ensure that power that is supplied to the printer and that all devices
connected to the printer have been switched OFF and that the cables
2-1. Connecting the buzzer cable
Plug the buzzer cable into the peripheral drive connector on the back of the
printer.
2-2. Mounting the buzzer unit
M3 screw
M3 screws
M3 screws