Hansgrohe AXOR Arco 11010 Serie Manual Del Usuario página 8

Assembly
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in
position on the basin / bidet.
3. Slip the slide washer, washer and collar nut
over the hose and threaded base and tighten
the collar nut by hand.
4. Tighten screws.
5. Connect the supply pipes to the isolation valves;
cold right - hot left.
6. Connect the pull rod to the pop-up waste.
The hot and cold supplies must be of equal pres-
sures.
Operation
Basin Mixer 11010XXX + 1180XXX
The mixer is actuated by pulling the lever head.
Swivel to the left = hot water,
swivel to the right = cold water.
Turning the spout 180° forms a parabolic jet;
Turning the spout 90° reduses the waterflow (mouth
spray).
Basin Mixer 11015XXX
Opening and shut off, selection of temperature is in
the same way as the skin mixer 11010XXX.
Turning the spour 180° forms a parabolic jet.
Bidet Mixer 1100XXX
Opening and shut off, selection of temperature is in
the same way as the sink mixer.
The water jet can be orientated to an other direction
by simply turning the spout and/or the mousseur.
Technical Data
Operating pressure:
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temperature: 65° C
Rate of flow by 0,3 MPa:
Hansgrohe single lever mixers can be used toge-
ther with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa.
8 8
English
If the continuous flow heater makes any problems or
there comes not enough water, the flow limiter (3a)
located behind the mousseur must be removed.
Spare parts (see page 3)
1
2
3
4
5
5.1 pull knob
5.2 pull rod
6
7
8
9
10 holder with 3 nozzles
Special accessories
X
XXX = Colors
000 chrome plated
090 chrome plated/gold
max. 1 MPa
1,6 MPa
max. 80° C
7 l/min
handle cpl.
mouth spray connection
mousseur cpl. (10)
mousseur gold plated
cartridge cpl.
pull rod cpl.
fixation cpl.
spout cpl.
connection hose 450 mm
connection hose 600 mm
special tool set
(order as an extra)
11091XXX
94084000
13085000
94980990
11095000
92620XXX
94066XXX
94067000
13961000
11098XXX
94071XXX
14099XXX
13196XXX
58085000