Installing The Connection Box Xa-114; Hooking Up The Connection Box - Sony XAV-7W Instalación / Conexiones

Note
• Ensure that the mounting surface is
clean.
• Do not install the connection box
- in locations subject to high
temperatures
- in locations subject to direct sunlight,
warm air from heater outlets, or
other locations that can get hot.
• When attaching the hook-and-loop
fastener to the bottom of the connection
box, do not cover the model name plate
in the center.
Use of connectors
Insert until the connector clicks into
place. To remove, press here and pull out.

Installing the connection box XA-114

Cut off the required length of hook-and-loop fastener 8 and fix
the connection box 1 on the carpet or similar.
Hook-and-loop
fastener 8
On installation surface

Hooking up the connection box

Refer also to the section "3 Car Systems Connections" (page 14 -
15).
Main unit/connection
box interconnect 3
To Media Center main unit
Insert 3 until a click is heard.
Hook-and-loop
fastener 8
9