Publicidad
Idiomas disponibles
Idiomas disponibles
6. At alarm mode, press UP or DOWN to turn on or off the alarm,
when alarm is turned on, the alarm symbol
displayed at any
mode, when alarm turned off, the symbol disappears. When the
alarm time is reached, the alarm sounds for 1 minute, during alarm
activation press any button to stop the alarm. No matter whether the
units are put together or separated.
7. Countdown timer scope: 99:59 ~ 00:00
8. LED backlight turns on when they are put together, when
separated, when any one button pressed or when countdown timer
reaches 00:00, the light on for 10 seconds only.
9. Sound controlled LED backlight.
Operation instruction:
1. Mode switch
Insert the batteries, put the main unit and subordinate unit together
in a horizontal line, press MODE to switch in sequence: time mode
→ date mode → alarm mode → timer mode → temperature and
humidity mode.
When main unit and subordinate unit are separated, only
humidity and temperature displayed press the MODE, only the
display of main unit changes.
2. Time mode
Insert the batteries; put the main unit and subordinate unit together
in a horizontal line, display the default time 12:00 (am) at 12HR
system.
At time display mode, press SET to enter time setting in sequence:
hour → minute → circularly.
Press UP or DOWN to set the values, press and hold UP or
DOWN to increase or decrease quickly.
At setting mode, press MODE or without any button operation in
15 seconds quit from the setting and display the time.
With 12Hr display, the PM would appear on the display.
Time setting scope: hour from 1 to 12 or from 0 to 23, minute
from 00 to 59, when the minute changed, the second would be 0.
Publicidad
