TIME SETTING
You can set or change the current time on the Robot Cleaner.
Pressing 'Clock' button on the Remote Controller, when the Robot Cleaner is in standby mode,
will start the clock setting mode.
Select by using '◄ ►' buttons
on the Remote Controller.
The function can be heard
through the voice guide.
Tip
• Any scheduled cleaning will be activated based on the time on the Robot Cleaner. You must
set the clock before setting scheduled cleaning.
• If there is no input for 10 seconds, the clock setting is canceled.
26
Flickering
Flickering
Flickering
Set the hour by using '▲▼' buttons on
Remote Controller.
Set the minutes using '▲▼' buttons on
Remote Controller.
Set the AM/PM using '▲▼' buttons on
Remote Controller.
Pressing 'Clock' or '
' button on
Remote Controller will complete the
time setting process.