LG A2UW18GFAB Manual De Instrucciones página 4

IMPORTANT SAFETY INSTRUCTIONS
4
• Do not place a heater or other heating appliances near the power
cable. There is risk of fire and electric shock.
• Do not allow water to run into electric parts. Install the unit away from
water sources. There is risk of fire, failure of the product, or electric
shock.
• Do not store or use or even allow flammable gas or combustibles near
the product. There is risk of fire.
• Do not use the product in a tightly closed space for a long time.
Perform ventilation regularly. Oxygen deficiency could occur and
hence harm your health.
• Do not open the front grille of the product during operation. (Do not
touch the electrostatic filter, if the unit is so equipped.) There is risk of
physical injury, electric shock, or product failure.
• If strange sound, smell or smoke comes from product.Immediately
turn the breaker off or disconnect the power supply cable. There is
risk of electric shock or fire.
• Ventilate the product room from time to time when operating it
together with a stove, or heating element etc. Oxygen deficiency can
occur and hence harm your health.
• When the product is not to be used for a long time, disconnect the
power supply plug or turn off the breaker. There is risk of product
damage or failure, or unintended operation.
• Take care to ensure that nobody especially kids could step on or fall
onto the outdoor unit. This could result in personal injury and product
damage.
• Take care to ensure that power cable could not be pulled out or dam-
aged during operation. There is risk of fire or electric shock.
• Do not place ANYTHING on the power cable. There is risk of fire or
electric shock.
• When flammable gas leaks, turn off the gas and open a window for
ventilation befor turning on the product. Do not use the telephone or
turn switches on or off. There is risk of explosion or fire.
CAUTION
!
Installation
• Two or more people must lift and transport the product. Avoid person-
al injury.
• Do not install the product where it will be exposed to sea wind (salt
spray) directly. It may cause corrosion on the product.