Phase Linear PCD161 Manual Del Usario página 8

OPERATING INSTRUCTIONS
7
Audio Select Button (SEL)
Press the SEL button repeatedly to access
audio functions (volume, bass, treble, balance
or fade).
Use the VOL up/down buttons (3a and 3b) to
adjust the settings for a selected function. The
display will return to the normal indication 5
seconds after the last adjustment or when
another function is activated.
7
Bass Control
To adjust the bass level, first select the Bass
mode by pressing the SEL button (7) until
"BAS" appears on the display panel. Within five
seconds, press the VOL up/down buttons (3a
and 3b) to adjust the bass response from a
minimum of "bAS -7" to a maximum of "bAS 7".
"BAS 0" represents a flat response.
7
Treble Control
To adjust the treble level, press the SEL button
(7) until "TRE" appears on the display panel.
Within five seconds, press the VOL up/down
buttons (3a and 3b) to adjust the treble from a
minimum of "TRE -7" to a maximum of "TRE 7".
"TRE 0" represents a flat response.
7
Left/Right Balance Control
To adjust the left-right speaker balance, press
and release the SEL button (7) until the "BAL"
indication appears on the display panel. Within
five seconds, press the VOL up/down buttons
(3a and 3b) to adjust the balance between the
left and right speakers from "bA.L 10" (full left)
to "bA.r 10" (full right). "BAL 0" represents an
equal balance level between the left and right
speakers.
4
PCD161
PWR
BY JENSEN
BAND
6
7
Front/Rear Fader Control
To adjust the front/rear speaker balance, press
the SEL button (7) until "FAD" appears on the
display panel. Within five seconds, press the
VOL up/down buttons (3a and 3b) to adjust the
balance between the front and rear speakers
from "FA.f 10" (full front) to "FA.r 10" (full rear).
"FAD 0" represents an equal balance level
between the front and rear speakers.
CD RECEIVER
CD
REPEAT
5
16 14 13
10 3b 7
8
AUX SEL EQ
VOL
DISP
RANDOM
AUX
11 3a
15 17
PCD161
9