Seatpost Installation - DVO GARNET Guía De Configuración Del Manual Del Propietario

ENGLISH

SEATPOST INSTALLATION

Install the seatpost at the desired height. Your seatpost must be inserted into the
seat tube with a minimum of 120mm [MINIMUM INSERTION] of post insertion. Or
the minimum amount specified by your frame manufacturer; whichever is greater.
Torque the seat clamp device to the frame manufacturer's lowest specification.
Do not exceed 5 to 7Nm as this will prevent the seatpost from functioning prop-
erly.
Minimum Insertion
Installing the seatpost with less than the minimum length required for in-
sertion can cause damage to the seatpost and/or bicycle frame which can
cause the seatpost and/or bicycle frame to fail, which can lead to serious
injury and/or death.
14
WARNING!
GARNET DROPPER OWNER'S MANUAL & SET UP GUIDE